Pump – The Heart of a Pool System
The pump is the heart of a pool system, providing the power needed to circulate the water. Its main purpose is to filter the water, keeping it clear and ensuring complete recirculation.
Pumps are designed exclusively for water pre-filtration and recirculation, and are intended to operate with clean water at temperatures of up to 35°C and salinity levels of up to 6 g/l. Before use, the pool must be thoroughly cleaned of sediment, floating and suspended particles, algae, microorganisms, grass, leaves, and other debris. The unit must be installed in a horizontal position and securely fixed to the base. Before switching it on, the pre-filter must be filled with water to a level above the suction pipe, and the basket must be put back in place. The unit must not be operated if there is no water in the pre-filter.
Choosing the right pump is essential for the proper operation of the pool water treatment system.
The main steps for selecting a pump are:
Determine the required flow rate based on the pool volume and the level of contamination. The flow rate must always be compatible with the installed filter. It is essential that the flow is neither too low nor too high.
Determine the required pressure based on the characteristics of the hydraulic system. This should also take into account all other installed equipment, such as salt chlorinators and heat pumps, which can affect flow rate or pressure.
Select from the range of pumps that provide the required flow rate and pressure.
Choose the pump with the features that best meet the requirements of the pool and its owner.
Pumps can also be used for other applications, such as hydromassage or various water features. In these cases, the specifications for each application should be reviewed before selecting the appropriate pump.
Variable-speed technology provides the highest level of convenience and efficiency. It is undoubtedly the best choice for the most demanding users.
The equipment room where the pump is installed must be well ventilated and free from aggressive substances. Before starting the circulation pump, all valves in the circulation system must be open.
The pre-filter, its housing, and seals must be cleaned after every 100 hours of operation. The pump should be inspected regularly, once a year, and any worn parts should be replaced during normal use. If the capacitor, bearings, mechanical seal, O-ring, and other sealing components have not been replaced within 10,000 hours of operation, they must be replaced.
Whether you are looking for a pump that offers energy savings, quiet operation, and crystal-clear water, a solution suitable for all types of pools that is easy to maintain and delivers high performance, or a smaller, medium-performance pump due to space limitations, you will find the right solution in the Zodiac ranges.
ZODIAC FloPro™ pumps are made from corrosion-resistant materials. The pump body is made of thick, glass-reinforced polypropylene, making it durable and quiet. They are equipped with highly energy-efficient asynchronous motors.
Zodiac FloPro pumps are available in 9 models, ranging from 0.5 to 2.0 HP, to meet the needs of most pools. They are easy to install, including when replacing an existing pump, and require minimal maintenance.
